|
|
|
COMPLETE LOW TENSION ( LT ) PANELS |
MAIN LT PANELS :- |
Our extensive and highly usable range of control panelsincludes Main L.T. panel that is available in compartmentalized constructions &with IP54 Production. It consists of incoming ACB or MCCB and outgoings MCCB'S or SDFU'S as per the requirement of the customer. |
ELECTRICAL MAIN L.T. PANELS :- |
Main L.T. Panel comprises of incoming ACB/MCCB and outgoings MCCB'S/SDFU'S as per customers requirement.The panel is compartmentalised in construction and with IP54 Protection. |
|
|
|
|
|
Power Control Centers (PCC PANELS - Drawout & Fixed type) |
We are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features: |
Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply |
They will be installed indoors and will work efficiently up to an ambient temperature of 50°C |
All doors will be suitably labeled and marked for convenience of operation & maintenance. |
|
Construction :- |
Modular design |
Free standing |
Floor mounting type using 2.0/1.6 mm CRCA sheet. |
The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired. |
Finish:- |
The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. |
Bus Bars & Internal Wiring:- |
Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board. |
Switch gears/ Components:- |
Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. |
Standards:- |
Ours Panels conform to the standards such as, IS 4237; IS 8623; IS 375 |
Switch gears/ Components:- |
Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. |
|
|
|
|
Motor Control Centers (MCC PANELS - Drawout & Fixed type) |
Our company is engaged in designing and manufacturing of Motor Control Centers or MCC that have the capacity to fedd larger loads. These can also be availed with multiple power stabs that help in supporting high capacity industrial motors. Our
specialization lies in manufacturing these MCC's as per the specifications provided by the customers at industry leading prices. These MCC units
comprise:
Full voltage non-reversing and full voltage reversing starters |
- AC variable frequency drives
- PLC I/O chassis
- Solid-state motor controllers
- Lighting panels
- Transformers
- Analog or digital metering
- Feeder circuit breakers
- Feeder fusible disconnects
|
Technical Specifications:- |
- Operational Current: 32A to 1600A
- Ambient Temperature: 40.50 degree Celsius in single and double front
- Withstand Capacity: 16KA to 100 KA
- Degree of Protection: As per IS Standards
- Types of Starters Include: Automatic Star Delta, Direct On-line, Soft Starters, Varied Frequency Drives, Stator Rotor Starters and Auto Transformer Starters
|
|
|
|
|
Automatic Power Factor Correction Capacitor Panels (APFC PANELS ) |
Application:- |
It is installed at the induction load areas where the power factor comes down. Generally installed at Factories, Big Offices, etc. |
- Models & Amps/ Kva Rates: Upto 800 Kvar
|
Features:- |
- World advanced Microcontroller Technology is used
- Auto/Manual selector is available
- Kvar by Kvar selectable system
- Stage on LED indications are available
- Stage to stage capacitor boosting & reconnection intervals; 20 secs delay
- Panel mountable, serviceable
- Fully enclosed wall mountable
- Working temperature up to 55 degree celcius
- Cable entry: Bottom (top optional)
- Incoming control and total protection of panel with 3pole/ MCCB
- Soft relay operation of capacitor –boosting help for smooth power factor
- Management & avoid sound and disturbances
- Power & control wiring: by copper multi strand ISI wire
- Capacitor bank rating: 440v/according to your load required KVAR
- For standard safety on Capacitor efficiency losses, Hunting etc., IEC (International Electric Code) Standards
Higher, Healthy PF maintaining (between 0.94-0.99) brings
- Good quality & Healthy run of your induction load(Motors , Air conditioners, compressors, chokes, etc
- It adds life to your, A/C, Tube lights, Compressors, Motor & other loads
- Off course, great escapes from the penalty from the electricity Board
- Chance of getting good incentive from the electricity Board
|
|
|
|
|
Relay Control Panel (R.C. Panel) complete with all CT, PT and other accessories |
Custom Built relay control panels are used in large industries and malls. These panels are used in critical applications where consistency of power supply is a must.
Relay and Control panels helps in: |
1) Motor Protection |
2) Transformer Protection |
3) Overhead Transmission Line Protection |
4) Line Cable Protection |
5) CB Control Panels |
6) Annunciation |
7) Synchronizing Panels |
|
|
|
|
|
LT Bus Duct & Rising Mains, Double Bus Bar Panels |
|
Presenting a range of Bus Ducts and Rising Mains that are available upto 4000 A, which can be operated with less than 35 degree Celsius Temperature Rise over an Ambient of 40 degree Celsius. Their short circuit withstands capacity falls at 50kA. The non-segregated Bus Ducts with inter leaving design are aptly designed for indoor and outdoor installation with IP: 55 degree of protection. All our bus duct systems are type tested. ENTRACO is major exporter of bus duct system & its complete solution with Erection & Commissioning services |
We are pioneer in Design, Engineering & Manufacturer of various types of Bus Ducts and Bus Trunking Systems like: |
- Phase segregated & non segregated metal enclosed bus duct
- Super compact
- Sandwich type bus duct
- Super compact, resin cast IP 68 bus duct
- Canallies system for lighting & low power distribution ranging from 40 Amp. to 120 Amp.
|
Recent introduction of canalized bus duct: |
- A complete bus duct & bus trunking system range is offered by ENTRACO with complete end to end design, engineering & erection services.
- Metal enclosed (CRCA / Aluminium sheet) air insulated LV bus duct 1000 V ranging from 1000 Amp. to 6000 Amp.
- HV bus duct – 11 kV / 22 kV / 33 kV – metal enclosed, segregated phase and non-segregated phase bus duct system ranging from 600 Amp. to 4000 Amp.
- Super compact, IP 68, resin cast bus duct from BKS stromschienen Ag , Switzerland as their exclusive authorised representative for india & Sub- continent region for sandwich bus duct ranging from 100 Amp. to 4000 Amp.
• Can-allies system for lighting & low power distribution ranging from 40 Amp. to 120 Amp.
|
|
|
|
|
|
|
Auto and Manual Synchronizing Panel , DG Synchronizing Panels |
|
We manufacture premium quality of Load Sharing and Synchronizing Panels that are made from high quality raw materials. These panels synchronize the different DG sets as per the load requirement of the system and if the load increases, it switches on the other DG sets one by one and synchronizes with the system automatically through PLT (Panel Logic Control) and when the load decreases below the desired level, it automatically disconnects the DG sets one by one and switches off as per the load requirement. |
|
|
|
|
|
|
|
|
|
|
|
PLC & Drives based HVAC Control Panels |
|
We offer high performance, low noise drive and PLC control panels that are high in performance and long lasting in nature. Our control panels are capable of giving higher output and consume less power. Compact in design, these drives and PLC control panels are largely used in the global arena. These panels are available upto 200 drives. |
|
|
|
|
|
FIRE PANELS |
|
We are one-stop platform that offers different types of control panels for various purposes. Highly reliable and safe to use, our exclusive range includes well-constructed Fire Panels that are specifically designed for handling fire cases. It is a central control device that is used for identifying, reporting and acting in case of fire occurrence within a building. |
|
|
|
|
|
SOFT STARTER PANEL |
These Panels are manufactured using soft starters for various ratings of Motors to achieve optimal level of power consumption and linear acceleration and deacceleration for pumps/motors. |
ELECTRICAL SOFT STARTER PANEL:- |
We are specialized in the designing & developing of soft starter panels that use soft starters for different ratings of motors. |
This is helpful in achieving optimal level of power consumption and linear acceleration as well as de-acceleration for pumps & |
motors. |
|
|
|
|
|
|
AC single & double front) / DC (floor &wall mounted) Distribution Board |
Manufacturing of distribution Boards that are engineered and manufactured to exceed the latest standards and the numerous features make these boards extremely user and installer friendly. Their durable white finish gives an aesthetic appeal and assist wiring in dimly lit areas. Their enclosure comes complete with bus bars, removable sub plate, covers, neutral & earth terminals and labelling. |
|
|
|
|
Push Button Station |
We manufacture push button station & junction box and location control stations. All the motors, instruments are operated from push button station. |
|
|
|
|
Pneumatic, Generator, Crane, Boiler Control panels |
|
This scanner monitors, displays, annunciates and trips up to 8/12 temperature. It is enhanced with a micro controller that offers key board programming. Some of its features are as follows: |
- Linearized indication
- Digital calibration
- Compact size
- RISC type micro controller
- Optional input pt-100 RTD/K type thermocouple
- Indicate & controls temperature of eight different temperature zone
- Two alarm with hysteresis for individual channel
- Low Alarm Set Point
- Hysteresis according to application requirement
- RS232/ RS485 communication port
|
|